LM393 alternatives & equivalent parts
Dual differential comparator — common packages: SOIC-8, PDIP-8. Each candidate below cites its manufacturer datasheet; check the relationship badge before substituting.
5 verified alternatives for LM393
| Alternative | Manufacturer | Relationship | Key differences | Source |
|---|---|---|---|---|
| LM293 | Texas Instruments | Pin-compatibleDrop-in: same footprint and pinout. | Same dual-comparator die in a wider temperature grade: -25 to +85 C versus LM393's 0 to +70 C. Same 2-30 V recommended supply range (36 V absolute maximum) and identical 8-pin pinout. | TI datasheet |
| LM2903 | Texas Instruments | Pin-compatibleDrop-in: same footprint and pinout. | Extended/industrial temperature grade (-40 to +125 C); otherwise the same dual comparator, supply range, and pinout as LM393. | TI datasheet |
| LM393B | Texas Instruments | Pin-compatibleDrop-in: same footprint and pinout. | Next-generation drop-in replacement: the recommended supply range extends to 36 V (the classic part is rated 2-30 V recommended; 38 V is the B version's absolute maximum, not a working voltage), with lower input offset voltage and bias current and faster response than the classic LM393. TI explicitly lists it as a drop-in replacement for LM393. | TI datasheet |
| LM2903B | Texas Instruments | Pin-compatibleDrop-in: same footprint and pinout. | Next-generation drop-in in the extended temperature grade: recommended supply to 36 V (38 V absolute maximum) with improved offset and speed over LM2903/LM393. TI explicitly lists it as a drop-in replacement. | TI datasheet |
| TS393 | STMicroelectronics | Pin-compatibleDrop-in: same footprint and pinout. | ST's CMOS dual comparator, stated pin-to-pin and functionally compatible with bipolar LM393. Supply limited to 2.7-16 V (vs 2-30 V recommended, 36 V absolute maximum, for LM393) and much lower supply/bias current; check output drive and response speed before substituting. | ST product page |
Key parameters from manufacturer datasheets
| Part number | Manufacturer | Supply range | Quiescent current | Input offset voltage | Response time | Temperature range | Packages | Source |
|---|---|---|---|---|---|---|---|---|
| LM393 | Texas Instruments | 2–30V (absolute maximum 36V) | 0.45mA typ / 1mA max (@5V, both channels combined) | 2mV typ / 5mV max(@25°C) | 1.3µs typ (5mV overdrive) / 0.3µs (TTL step) | 0–+70°C | SOIC-8、PDIP-8、TSSOP-8、VSSOP-8 | TI datasheet |
| LM293 | Texas Instruments | 2–30V (absolute maximum 36V) | 0.45mA typ / 1mA max (@5V, both channels combined) | 2mV typ / 5mV max(@25°C) | 1.3µs typ (5mV overdrive) / 0.3µs (TTL step) | -25–+85°C | SOIC-8、PDIP-8、VSSOP-8 | TI datasheet |
| LM2903 | Texas Instruments | 2–30V (absolute maximum 36V) | 0.8mA typ / 1mA max (@5V, both channels combined) | 2mV typ / 7mV max(@25°C) | 1.3µs typ (5mV overdrive) / 0.3µs (TTL step) | -40–+125°C | SOIC-8、PDIP-8、TSSOP-8、VSSOP-8 | TI datasheet |
| LM393B | Texas Instruments | 2–36V (absolute maximum 38V) | 400µA typ / 600µA max (@5V, both channels combined) | 0.37mV typ / ±2.5mV max(@25°C) | 1.0µs typ (5mV overdrive) / 300ns (TTL) | -40–+85°C | SOIC-8、TSSOP-8、VSSOP-8、SOT-23、WSON-8 | TI datasheet |
| LM2903B | Texas Instruments | 2–36V (absolute maximum 38V) | 400µA typ / 600µA max (@5V, both channels combined) | 0.37mV typ / ±2.5mV max(@25°C) | 1.0µs typ (5mV overdrive) / 300ns (TTL) | -40–+125°C | SOIC-8、TSSOP-8、VSSOP-8、SOT-23、WSON-8 | TI datasheet |
| TS393 | STMicroelectronics | 2.7–16V | — | — | — | — | — | ST product page |
Parameters follow the manufacturer datasheet (TI SLCS005AH; for TS393, follow the ST datasheet). Check the schematic before replacing.
BEFORE YOU SUBSTITUTEPre-replacement checklist
- Match the package (SOIC-8 vs PDIP-8) and confirm the pinout before soldering.
- Confirm the supply rail: TS393 only supports 2.7-16 V; classic LM393-family parts run 2-30 V recommended (36 V absolute maximum), and the B versions run 2-36 V recommended (38 V absolute maximum).
- Check input offset voltage and response time for precision or fast-switching uses.
- Verify the temperature grade matches the application (LM2903/LM2903B for -40 to +125 C).
Frequently asked questions about replacing LM393
Can LM2903 directly replace LM393?
Yes. LM2903 is the industrial-temperature version of LM393 (-40 to +125°C), with the same pinout and package and the same core electrical characteristics. Before replacing, confirm that the temperature grade meets the application requirement.
What is the difference between LM393B and LM393?
LM393B is TI's newer drop-in replacement model. Its recommended supply range extends to 36V (LM393: 2-30V recommended, 36V absolute maximum; the B version's 38V figure is an absolute maximum, not a working voltage), it has lower input offset voltage and bias current, and it responds faster. TI explicitly lists it as a drop-in replacement for LM393.
Can TS393 replace LM393?
Pin-compatible, but with limits: TS393 is a CMOS process with a supply of only 2.7–16V (LM393: 2–30 V recommended, 36 V absolute maximum). If the original design supply is above 16V or relies on bipolar output drive capability, it cannot be directly replaced. Check the supply rail before replacing.
Is a PCB change needed when replacing?
All 5 models have a SOIC-8 version and are pin-to-pin compatible, so no board change is needed. Before replacing, still check that the package, supply rail, offset voltage and temperature grade meet the original design.
Need the exact lot, date code or a second source quoted?
Send the original MPN and the approved alternative. Sourceics reconfirms source, stock, date code and commercial terms before any order — no substitution without your engineering approval.
Request a quote for LM393Source part reference: TI datasheet. Equivalence notes are reference guidance, not a guarantee of fit — always verify against your schematic and layout.