100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsAnalog ICsAD7190BRUZ
PACKAGE REFERENCETSSOP-24Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

AD7190BRUZ

Analog Devices

AD7190BRUZ is an Analog Devices 24-bit sigma-delta ADC with an internal PGA in 24-lead TSSOP — the established weigh-scale and strain-gauge front end: the CN0102 reference design builds a complete precision weigh scale around it with only input filters added. The chopping architecture, bridge power-down switch, on-chip temperature sensor and burnout detection complete the transducer interface, and the output data rate is set in firmware, from the slow precision rates weigh scales use up to the faster rates hopper and check-weighing loops need. Selection advice: the BRUZ code is the TSSOP-24 tube version — for multiplexed multi-channel weigh systems step up to the AD7124-8 on this site; the AD7190 stays the pick for dedicated single-bridge precision channels. Match the full BRUZ code for package and temperature grade. Parameters verified against Analog Devices documentation.

Analog ICsAnalog-to-digital converterTSSOP-24
MPN
AD7190BRUZ
Manufacturer
Analog Devices
Family
Analog-to-digital converter
Package
TSSOP-24
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
24-bit sigma-delta ADC with internal PGA
Output data rate
4.7 Hz to 4,800 Hz · chop disabled; chop caps the sinc4 rate at 1.2 kHz
Resolution
24 bits no missing codes minimum · FS > 1, sinc4 filter
Integral nonlinearity
±5 ppm of FSR maximum (B grade, gain = 1); ±15 ppm of FSR maximum (gain > 1) · ±1 ppm typical at gain = 1 — all per datasheet Table 1
Offset error
±75/gain µV typical with chop disabled · ±0.5 µV typical with chop enabled; offset drift ±5 nV/°C typical with chop
RMS noise
8.5 nV typical · 4.7 Hz data rate, gain = 128, sinc4, chop disabled, 5 V reference; 20.5 bits typical noise-free resolution under the same conditions
Common-mode rejection
100 dB minimum at gain = 1 · 110 dB minimum at gain > 1 (DC)
Supply voltages
AVDD 4.75 V to 5.25 V; DVDD 2.7 V to 5.25 V · (Absolute maximum, Table 3: AVDD and DVDD −0.3 V to +6.5 V to AGND; AGND-to-DGND −0.3 V to +0.3 V; analog and reference inputs −0.3 V to AVDD + 0.3 V; digital inputs and outputs −0.3 V to DVDD + 0.3 V to DGND; AIN/digital input current 10 mA; operating −40 °C to +105 °C; storage −65 °C to +150 °C; maximum junction temperature 150 °C — not operating ranges)
Analog supply current
5 mA typical / 6.2 mA maximum · B grade, gains 16 to 128, buffer off
Order-code package
TSSOP-24 (RU-24) · the only package; B grade, −40°C to +105°C; Z denotes RoHS-compliant
Manufacturer packing
Tube for AD7190BRUZ; AD7190BRUZ-REEL is the same part on tape and reel · packing forms, not stock or MOQ
Source: Analog Devices AD7190 Data Sheet Rev. C · Table 1 Specifications, Table 3 Absolute Maximum Ratings, Tables 6–7 Noise/Resolution, Ordering Guide (p. 39) · Reviewed 2026-10-30
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Analog ICs records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

AD7190BRUZ FAQ

What are the key specifications of AD7190BRUZ?

From the verified technical profile: Function: 24-bit sigma-delta ADC with internal PGA; Output data rate: 4.7 Hz to 4,800 Hz · chop disabled; chop caps the sinc4 rate at 1.2 kHz; Resolution: 24 bits no missing codes minimum · FS > 1, sinc4 filter. These are the catalog-recorded values for AD7190BRUZ — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.