100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsAnalog ICsADS1220IPWR
PACKAGE REFERENCETSSOP-16Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

ADS1220IPWR

Texas Instruments

ADS1220IPWR is a 24-bit precision analog-to-digital converter from Texas Instruments in a 16-pin TSSOP package, with an SPI interface — for sensor measurement in weigh scales, thermocouple systems and industrial data acquisition. The 24-bit delta-sigma core is the selection point: it resolves microvolt-level sensor signals that lower-resolution converters cannot, with the digital filter handling noise rejection. Selection advice: the IPWR suffix denotes TSSOP-16 on tape and reel — match the full code to your layout. Confirm your required sample rate and input configuration (differential vs single-ended, PGA gain) against the datasheet before committing.

Analog ICsAnalog-to-digital converterTSSOP-16
MPN
ADS1220IPWR
Manufacturer
Texas Instruments
Family
Analog-to-digital converter
Package
TSSOP-16
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
24-bit delta-sigma ADC with low-noise PGA, voltage reference, two IDACs and SPI interface · TSSOP-16 (PW)
Resolution
24 bits, no missing codes (§6.5)
Data rates
Normal mode 20 to 1000 SPS; turbo mode 40 to 2000 SPS; duty-cycle mode 5 to 250 SPS — discrete sets per mode (§6.5, row DR)
PGA gains
1, 2, 4, 8, 16, 32, 64, 128 V/V (§8.3.2); with the PGA bypassed only gains 1, 2 and 4 are available (§6.3)
Input channels
2 differential or 4 single-ended (input multiplexer)
Excitation current sources (IDACs)
10, 50, 100, 250, 500, 1000, 1500 µA settings; accuracy −6% minimum / ±1% typical / +6% maximum per IDAC (§6.5)
Internal reference
2.045 V minimum / 2.048 V typical / 2.051 V maximum initial accuracy at TA = 25 °C (§6.5)
Supply voltages
Unipolar AVDD to AVSS 2.3 V to 5.5 V; bipolar ±2.5 V nominal; DVDD to DGND 2.3 V to 5.5 V (§6.3)
Supply currents
Analog, normal mode gain 1–16: 340 µA typical / 490 µA maximum; power-down 0.1 µA typical / 3 µA maximum. Digital, normal mode: 75 µA typical / 110 µA maximum (§6.5; header conditions AVDD = DVDD = 3.3 V, PGA enabled, 20 SPS, external VREF = 2.5 V, IDACs off — see the data-sheet footnote for mode deltas)
Interface
SPI-compatible, mode 1 only (CPOL = 0, CPHA = 1) (§8.5.1)
Absolute maximum — supplies and inputs
AVDD to AVSS and DVDD to DGND −0.3 V to +7 V; analog inputs AVSS − 0.3 V to AVDD + 0.3 V; digital inputs DGND − 0.3 V to DVDD + 0.3 V; AVSS-to-DGND voltage −2.8 V to +0.3 V; input current at any pin ±10 mA; junction temperature 150 °C maximum; storage −60 °C to +150 °C (§6.1)
Order-code package
TSSOP (PW), 16 pins · device marking ADS1220
Manufacturer packing
2500 pieces, large tape and reel (Package Option Addendum); the IPW sibling is the 90-piece tube
Operating temperature
−40 °C to +125 °C (§6.3)
Source: TI ADS1220 Data Sheet SBAS501D (Rev. D, revised May 2026) · §6.1 Absolute Maximum Ratings, §6.3 Recommended Operating Conditions, §6.5 Electrical Characteristics, §8.3.2 PGA, Package Option Addendum · Reviewed 2026-10-30
ORDER-CODE COMPARISON

Same series, different order codes.

ADS1220 is available in the following manufacturer order codes. They share the same Analog-to-digital converter design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
ADS1220IPWTSSOP-16TUBESame TSSOP-16 package as ADS1220IPWR; this difference alone does not require PCB pad changes; factory packing is TUBE, 90 per pack; ADS1220IPWR is LARGE T&R, 2,500 per pack.
ADS1220IPWRTSSOP-16——
ADS1220IRVARVQFN-16LARGE T&RPackage/pins: VQFN (RVA), 16 pins; ADS1220IPWR is TSSOP (PW), 16 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 3,000 per pack; ADS1220IPWR is LARGE T&R, 2,500 per pack.
ADS1220IRVATVQFN-16SMALL T&RPackage/pins: VQFN (RVA), 16 pins; ADS1220IPWR is TSSOP (PW), 16 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is SMALL T&R, 250 per pack; ADS1220IPWR is LARGE T&R, 2,500 per pack.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Analog ICs records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

ADS1220IPWR FAQ

What is the difference between ADS1220IPWR and ADS1220IPW, ADS1220IRVAR, ADS1220IRVAT?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — ADS1220IPW: Same TSSOP-16 package as ADS1220IPWR; this difference alone does not require PCB pad changes; factory packing is TUBE, 90 per pack; ADS1220IPWR is LARGE T&R, 2,500 per pack.; ADS1220IRVAR: Package/pins: VQFN (RVA), 16 pins; ADS1220IPWR is TSSOP (PW), 16 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 3,000 per pack; ADS1220IPWR is LARGE T&R, 2,500 per pack.; ADS1220IRVAT: Package/pins: VQFN (RVA), 16 pins; ADS1220IPWR is TSSOP (PW), 16 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is SMALL T&R, 250 per pack; ADS1220IPWR is LARGE T&R, 2,500 per pack.. ADS1220IPWR itself is the TSSOP-16 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of ADS1220IPWR?

From the verified technical profile: Function: 24-bit delta-sigma ADC with low-noise PGA, voltage reference, two IDACs and SPI interface · TSSOP-16 (PW); Resolution: 24 bits, no missing codes (§6.5); Data rates: Normal mode 20 to 1000 SPS; turbo mode 40 to 2000 SPS; duty-cycle mode 5 to 250 SPS — discrete sets per mode (§6.5, row DR). These are the catalog-recorded values for ADS1220IPWR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.