100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsIntegrated CircuitsGD32F303CBT6
PACKAGE REFERENCELQFP-48Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

GD32F303CBT6

GigaDevice

GD32F303CBT6 is a mainstream Arm Cortex-M4 microcontroller from GigaDevice in LQFP-48 — the B field of the order code is the 128 KB Flash density step, and its ratings are tabulated with their conditions in the parameter table, per the GigaDevice GD32F303xB datasheet Rev 1.1. Selection advice: the CBT6 code is a distinct density from the GD32F303CCT6 sibling listed on this site — GigaDevice's official selector lists them as separate rows and the official GD32F303B-START kit targets this CBT6 code, so the two are not interchangeable on a BOM line. The T6 tail is the LQFP industrial-temperature grade; designs moving from the STM32F103 class should budget a firmware port, not a drop-in swap. Parameters verified against the GigaDevice GD32F303xB datasheet Rev 1.1.

Integrated Circuits32-bit microcontrollerLQFP-48
MPN
GD32F303CBT6
Manufacturer
GigaDevice
Family
32-bit microcontroller
Package
LQFP-48
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
Arm Cortex-M4 32-bit microcontroller (GD32F303xB family) · LQFP-48
Supply voltage
VDD 2.6 V minimum / 3.3 V typical / 3.6 V maximum; VDDA the same as VDD; VBAT 1.8 V minimum / 3.6 V maximum (Table 4-2)
Clock frequency
AHB clock fHCLK 120 MHz maximum; APB1 60 MHz maximum; APB2 120 MHz maximum (Table 4-3)
Run-mode supply current
IDD + IDDA 35.5 mA typical with all peripherals enabled and 19.85 mA typical with all peripherals disabled — VDD = VDDA = 3.3 V, HXTAL = 25 MHz, system clock = 120 MHz, code executing from on-chip Flash (Table 4-7)
Memory
128 KB Flash (code area) and 32 KB SRAM for the CBT6/CBT7 column of the device features list (Table 2-1)
Operating temperature
−40 °C to +85 °C for this grade-6 order code (Table 6-1); maximum junction temperature 125 °C (Table 4-1)
Absolute maximum ratings
VDD, VDDA and VBAT pins VSS − 0.3 V to VSS + 3.6 V (VDDA against VSSA); input voltage on 5 V-tolerant pins VSS − 0.3 V to VDD + 3.6 V and never above 5.5 V, on other I/O pins VSS − 0.3 V to 3.6 V; GPIO current ±25 mA per pin and ±80 mA in total; supply and ground pin voltage differences |ΔVDDX| and |VSSX − VSS| 50 mV maximum each; storage temperature −65 °C to +150 °C (Table 4-1)
Order-code package
CBT6 order code: 128 KB Flash, LQFP48 green package, industrial temperature operating range −40 °C to +85 °C (Table 6-1)
Source: GigaDevice GD32F303xB Datasheet Rev 1.1 (Feb 2026) · Table 2-1 device features, Tables 4-1 to 4-3 and 4-7 electrical characteristics, Table 6-1 ordering information · Reviewed 2026-10-31
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Integrated Circuits records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

GD32F303CBT6 FAQ

What are the key specifications of GD32F303CBT6?

From the verified technical profile: Function: Arm Cortex-M4 32-bit microcontroller (GD32F303xB family) · LQFP-48; Supply voltage: VDD 2.6 V minimum / 3.3 V typical / 3.6 V maximum; VDDA the same as VDD; VBAT 1.8 V minimum / 3.6 V maximum (Table 4-2); Clock frequency: AHB clock fHCLK 120 MHz maximum; APB1 60 MHz maximum; APB2 120 MHz maximum (Table 4-3). These are the catalog-recorded values for GD32F303CBT6 — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.