100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsIntegrated CircuitsSTM32F030F4P6TR
PACKAGE REFERENCETSSOP-20Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

STM32F030F4P6TR

STMicroelectronics

STM32F030F4P6TR is a 32-bit Arm Cortex-M0 microcontroller from STMicroelectronics in TSSOP-20 — for space-constrained control tasks like small appliances, LED drivers and sensor nodes. The TSSOP-20 footprint is the selection point: 32-bit control where only an 8-pin or 20-pin device fits. Selection advice: the F4 denotes 16 KB Flash / 4 KB SRAM — the smallest STM32F0; the P6TR denotes TSSOP-20 in tape and reel. If your code outgrows 16 KB, step to the F030C8 before re-spinning the board.

Integrated Circuits32-bit microcontrollerTSSOP-20
MPN
STM32F030F4P6TR
Manufacturer
STMicroelectronics
Family
32-bit microcontroller
Package
TSSOP-20
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Device and package reference

Manufacturer device/package data only. Full ordering-code validity, grade and current lifecycle are not established by this reference; confirm them during quotation.

Function
Value-line 32-bit microcontroller · Arm Cortex-M0 — the 20-pin variant of the STM32F030 line
Core and clock
Cortex-M0 up to 48 MHz over the full VDD range (Tables 2 and 21) · flash access takes 1 wait state above 24 MHz (§6.3.5 conditions)
Memory
16 KB Flash; 4 KB SRAM with hardware parity (Table 2 — the code-size digit of this orderable)
GPIOs and peripherals
15 GPIOs; 1× SPI, 1× I2C, 1× USART, 1× 12-bit ADC (9 external + 2 internal channels), 1 advanced-control and 4 general-purpose timers, 5-channel DMA (Table 2)
Supply
VDD 2.4 V to 3.6 V; VDDA 2.4 V to 3.6 V and not below VDD (Table 21)
Run current
22.0 mA typical at 48 MHz, VDD = 3.6 V, all peripherals enabled, code running from Flash (Table 25)
Absolute maximum ratings
VDD−VSS and VDDA−VSS −0.3 V to +4.0 V, VDD-to-VDDA difference 0.4 V maximum, input voltage on FT/FTf pins VSS − 0.3 V to VDDIOx + 4.0 V, supply-pin variation 50 mV maximum, total current into all VDD lines 120 mA and 100 mA per VDD pin, injected current −5/+0 mA on FT pins and ±5 mA on TC/RST pins (±25 mA total), maximum junction temperature 150 °C and storage −65 °C to +150 °C are §6.2 absolute-maximum figures (Tables 18–20), not operating ranges
Order-code package
TSSOP-20 · code elements: F = 20 pins, 4 = 16 KB Flash, P = TSSOP, 6 = temperature grade (per the §8 ordering scheme), TR = tape and reel; device marking example 32F030F4P6 (§8, Figure 39)
Manufacturer packing
DS9773 prints no reel quantity for this orderable — confirm the reel quantity with the offer
Source: ST STM32F030x4/x6/x8/xC Datasheet DS9773 Rev 5 (Nov 2021) · Tables 2, 18–21 and 25, §8 Ordering information (F030F4 column/rows) · Reviewed 2026-10-30
ORDER-CODE COMPARISON

Same series, different order codes.

STM32F030F4 is available in the following manufacturer order codes. They share the same 32-bit microcontroller design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
STM32F030F4P6TSSOP-20—Compared with STM32F030F4P6TR, package and listed temperature grade match, but the order-code suffix differs. Verify the factory packing and PCB footprint before treating order codes as interchangeable.
STM32F030F4P6TRTSSOP-20——
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Integrated Circuits records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

STM32F030F4P6TR FAQ

What is the difference between STM32F030F4P6TR and STM32F030F4P6?

These are order-code variants of the same STMicroelectronics series. They share the core design; the ordering code selects the exact configuration — STM32F030F4P6: Compared with STM32F030F4P6TR, package and listed temperature grade match, but the order-code suffix differs. Verify the factory packing and PCB footprint before treating order codes as interchangeable.. STM32F030F4P6TR itself is the TSSOP-20 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of STM32F030F4P6TR?

From the verified technical profile: Function: Value-line 32-bit microcontroller · Arm Cortex-M0 — the 20-pin variant of the STM32F030 line; Core and clock: Cortex-M0 up to 48 MHz over the full VDD range (Tables 2 and 21) · flash access takes 1 wait state above 24 MHz (§6.3.5 conditions); Memory: 16 KB Flash; 4 KB SRAM with hardware parity (Table 2 — the code-size digit of this orderable). These are the catalog-recorded values for STM32F030F4P6TR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.