100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsSensorsMPU-6050
PACKAGE REFERENCEQFN-24Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

MPU-6050

TDK InvenSense

MPU-6050 is a TDK InvenSense 6-axis MEMS motion-tracking device in QFN-24 — a 3-axis gyroscope plus a 3-axis accelerometer with 16-bit ADCs, an on-chip Digital Motion Processor (DMP) engine, a FIFO buffer, a digital temperature sensor and an auxiliary master I2C bus for external magnetometers, with separate supply and I/O-level pins. The DMP plus FIFO is the selection point: motion-fusion, gesture and timing work runs on-chip while the host sleeps, which is why this part defined the Arduino/drone gimbal era of low-cost IMUs. Selection advice: the MPU-6050 supports I2C only — if you need SPI, the MPU-6000 is the pin-compatible twin with SPI plus a single supply pin; do not treat them as code-identical. TDK lists MPU-6050 as Obsolete — production has stopped and final shipment is complete, so treat any offer as end-of-life stock: require date-code traceability and, for new designs, evaluate the current TDK IMU family instead. Source: TDK InvenSense MPU-6000/MPU-6050 Product Specification PS-MPU-6000A-00 Rev. 3.4, Tables 6.1–6.3. Match the full MPU-6050 code.

Sensors6-axis MEMS IMUQFN-24
MPN
MPU-6050
Manufacturer
TDK InvenSense
Family
6-axis MEMS IMU
Package
QFN-24
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Obsolete — discontinued and not recommended for new designs; treat all supply as end-of-life stock
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
6-axis MotionTracking device — 3-axis gyroscope plus 3-axis accelerometer with 16-bit ADCs, an on-chip Digital Motion Processor (DMP), a 1,024-byte FIFO and an auxiliary master I2C bus for external magnetometers
Ranges / supply
User-programmable full-scale ranges: gyroscope ±250/500/1,000/2,000 °/s, accelerometer ±2/4/8/16 g · VDD 2.375 V to 3.46 V with a separate VLOGIC pin setting the I2C levels at 1.71 V to VDD (Table 6.3)
Absolute maximum ratings
Absolute maximum: supply voltage −0.5 V to +6 V; acceleration 10,000 g on any axis (Tables 6.1/6.2 absolute maximum ratings) · stress limits only
Order-code package
MPU-6050 in QFN-24, 4.0 mm × 4.0 mm × 0.9 mm · the code is complete as written; the SPI-capable twin is the separate MPU-6000 order code (ordering information)
Operating temperature
−40 °C to +85 °C · operating temperature range
Source: TDK InvenSense MPU-6000/MPU-6050 Product Specification PS-MPU-6000A-00 Rev. 3.4 · §6 Electrical Specifications (Tables 6.1–6.3) · Reviewed 2026-11-01
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Sensors records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

MPU-6050 FAQ

Is MPU-6050 still in production?

The manufacturer lists MPU-6050 as Obsolete — discontinued and not recommended for new designs; treat all supply as end-of-life stock. Manufacturer-channel supply is therefore lot-dependent and must be confirmed per RFQ — tell us your quantity and date-code requirements and we will check what can still be sourced. If you are designing this part in, ask us about an approved replacement before committing the BOM.

What are the key specifications of MPU-6050?

From the verified technical profile: Function: 6-axis MotionTracking device — 3-axis gyroscope plus 3-axis accelerometer with 16-bit ADCs, an on-chip Digital Motion Processor (DMP), a 1,024-byte FIFO and an auxiliary master I2C bus for external magnetometers; Ranges / supply: User-programmable full-scale ranges: gyroscope ±250/500/1,000/2,000 °/s, accelerometer ±2/4/8/16 g · VDD 2.375 V to 3.46 V with a separate VLOGIC pin setting the I2C levels at 1.71 V to VDD (Table 6.3); Absolute maximum ratings: Absolute maximum: supply voltage −0.5 V to +6 V; acceleration 10,000 g on any axis (Tables 6.1/6.2 absolute maximum ratings) · stress limits only. These are the catalog-recorded values for MPU-6050 — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.

What does the MPU-6050 6-axis MEMS IMU detect?

The catalog family for MPU-6050 is 6-axis MEMS IMU from TDK InvenSense, supplied as QFN-24. The exact measurement range, accuracy and operating conditions live in the manufacturer datasheet — confirm them there against your application before ordering.